Compressor rooms Receiver, dryer and filter in one bay
Receiver, dryer and filter in one bay A compact compressor bay tied in with modular aluminium: receiver, filters and dryer. Compressor rooms
Compressor rooms Multi-receiver manifold
Multi-receiver manifold Receivers, isolation valves and a filter on a single push-fit manifold. Compressor rooms
Manifolds & valves Four-drop distribution manifold
Four-drop distribution manifold Valved drops from one header, supported on channel brackets. Manifolds & valves
Overhead & structure Run through a new steel structure
Run through a new steel structure A long, light aluminium line clamped along the structure. No hot work. Overhead & structure
Manifolds & valves Flow-marked manifold
Flow-marked manifold Flow-direction arrows, tees, valves and filters connected push-fit. Manifolds & valves
Manifolds & valves Manifold with pressure gauge
Manifold with pressure gauge Four isolation valves and a gauge tapped off the main line. Manifolds & valves
Compressor rooms Receiver with wall-mounted filter panel
Receiver with wall-mounted filter panel Wall run dropping into a receiver, with a filter and regulator panel alongside. Compressor rooms
Overhead & structure Overhead run along roof trusses
Overhead run along roof trusses Light aluminium pipe clamped to steel trusses, no welding or hot work. Overhead & structure
Manifolds & valves Desiccant air dryer connections
Desiccant air dryer connections Clean vertical drops with a tee and ball valve around an air dryer. Manifolds & valves
Retrofit & large bore Large-bore line with flanged valves
Large-bore line with flanged valves Large-diameter modular pipe with butterfly valves and flanged take-offs. Retrofit & large bore
Manifolds & valves Receiver outlet with isolation valve
Receiver outlet with isolation valve Quickair line with a ball valve and flanged connection at a receiver. Manifolds & valves
Overhead & structure Receiver tie-in at height
Receiver tie-in at height An overhead drop with an isolation valve, coming down to a blue receiver. Overhead & structure
Retrofit & large bore Large-bore receiver connection
Large-bore receiver connection Elbow and clamp assembly connecting a red receiver to the main line. Retrofit & large bore
Compressor rooms Dryer and filter station
Dryer and filter station Flow-marked pipe, ball valves and a filter between receiver and dryer. Compressor rooms
Retrofit & large bore Underfloor trench run
Underfloor trench run Modular line laid in a trench on channel supports, ready for the cover plates. Retrofit & large bore
Compressor rooms Receiver tank connections
Receiver tank connections Elbows and flanged adapters linking air receivers to the main line. Compressor rooms
Compressor rooms Outdoor shed receiver connection
Outdoor shed receiver connection Vertical drops and valves beside a receiver in a sheet-metal shed. Compressor rooms
Retrofit & large bore Retrofit onto an existing steel line
Retrofit onto an existing steel line A modular branch tied into old black steel pipe with a ball valve. Retrofit & large bore
Compressor rooms Compressed air room installation
Compressed air room installation Overhead and floor-level runs around receivers, dryer and compressor. Compressor rooms
Compressor rooms Receiver and dryer header
Receiver and dryer header Compact header with valves and a filter between two air receivers. Compressor rooms